PRODUCTS : By Models
OVERLOCK
 
AN
ANGLE KINFE

Cloth Trimming assistance to heavy material.

Available Model:
747K-514M7, 747KD-514M7

Self-installation : Y
   
BK
BACK LATCHING

To prevent seam looseness, turn over the thread and then insert into overlock seaming at the beginning of sewing.
. KD207 Hand wheel: Standard equipment of 700K/BK machine, optional for BK device.
 

Available Model:
737K-504M5, 737KD-505M5
747K-514M5, 747KD-514M5

 

Self-installation : Y
   
CSA
IRON CASE SUCTION DEVICE

1. TWO WAY SUCTION (Rear and front suction).1/4 HP more than normal standard. (rear suction is for thread trimmer, front suction is for fabric waste) .
2. Quiet. 5dB lower than normal standard. 
3. Low temperature. 18% degree celsius lower than normal standard.
4. Space efficiency. 10% space saved than normal standard.
5. Easy assembly. 50% time saved for assembly.
6. Easy to clean, easy to assemble/disassemble,completed dust collection.
7. Air pressure can be adjusted by required.

Available model:
MODEL w/CT
MODEL w/DT
MODEL w/VT
 

Self-installation : Y
   
CSB
PLASTIC TANK SUCTION DEVICE

1. One way suction, 1/4 HP more than normal standard.(for rear suction thread trimmer)
2. Quiet, 5dB lower than normal standard. 
3. Low temperature. 10% lower than normal standard. 
4. Space efficiency. 25% space saved than normal standard. 
5. Easy assembly. 25% time saved for assembly. 
6. Easy to clean, easy toassemble/disassemble,completed dust collection. 
7. Air pressure can be adjustedby demand.

Available Model:
MODEL w/CT
MODEL w/DT
MODEL w/VT
 

Self-installation : Y
   
CT
HORIZONTAL PNEUMATIC TYPE CHAIN CUTTER (FLAT SUCTION)

Take thread into trimmer tube by suction motor or air compressor. (Applicable for 4~6 thread machine)

Available Model:
747K, 747KD
757K, 757KD
767K, 767KD
 

Self-installation : Y
   
DT
HORIZONTAL PNEUMATIC TYPE CHAIN CUTTER (FLAT SUCTION)

Take thread into trimmer tube by suction motor or air compressor. (Applicable for top feed RT/FT )

Available Model:
747DFT, 747DRT, 757DFT, 757DRT
 

Self-installation : Y
   
EC
ELECTRIC TYPE TAPE/ELASTIC CUTTER

Cutting tape/ elastic by pressing the button.
1.EC-A: Standard knife (1")
   EC-A1: Long knife (1-1/4")
2.Hand-control button: Standard
   Knee-control paddle (FEC34-A): Optional

Available Model:
MODEL w/GA/P
MODEL w/LFC-3
MODEL w/PS
MODEL w/TA
MODEL w/TG
MODEL w/TR

Self-installation : Y
   
ET-A1
FRONT AND RARE ELECTRONIC-EYE CONTROLLED VACUUM SYSTEM

.Energy saving: Reduce air compressor's loading to save energy.
.Noise reducing: By air valve control, air suction works only when sewing operation is proceeding.
.Easy installation: To install simply and then use immediately.
.Better sewing quality: As the sensor accurately deviers the start signal to air suction device, it stablizes the sewing operation.

Available Model:
ET-A1 for 700K & 700KD
 

Self-installation : Y
   
ET-A2-K
FRONT AND RARE ELECTRONIC-EYE CONTROLLED VACUUM SYSTEM WITH PNEUMATIC PRESSER FOOT LIFTER

.Energy saving: Reduce air compressor's loading to save energy.
.Noise reducing: By air valve control, air suction works only when sewing operation is proceeding.
.Easy installation: To install simply and then use immediately.
.Better sewing quality: As the sensor accurately deviers the start signal to air suction device, it stablizes the sewing operation.

Available Model:
ET-A2-K for 700K

 

Self-installation : Y
   
ET-A2-KD
FRONT AND RARE ELECTRONIC-EYE CONTROLLED VACUUM SYSTEM WITH PNEUMATIC PRESSER FOOT LIFTER

.Energy saving: Reduce air compressor's loading to save energy.
.Noise reducing: By air valve control, air suction works only  when sewing operation is proceeding.
.Easy installation: To install simply and then use immediately.
.Better sewing quality: As the sensor accurately deviers the start signal to air suction device, it stablizes the sewing operation.

Available Model:
ET-A2-KD for 700KD
 

Self-installation : Y
   
FG
SIDE TAPE HOLDER

For tape feeding, on the right side of the table.

Available Model:
MODEL w/GA/P,
MODEL w/PS,
MODEL w/TA
 

Self-installation : Y
   
GA
GATHERING DEVICE

Continuous or intermittent random gathering on lower ply.
P: Pipping Folder KV57 (tape width 25mm/ finish width 6mm) is optional. For pipping with rope inside, presser foot requires a trench, which is marked with P at the end of parts code. e.g. P204P.

Available Model:
747K-514H4, 747KD-514H4
757K-516H4, 757KD-516H4

Self-installation : Y
   
GB
GATHERING DEVICE FOR TOP FEED MODEL

Continuous or intermittent random gathering on lower ply, for top feed model.
P: Pipping Folder KV57 (tape width 25mm/ finish width 6mm) is optional. For pipping with rope inside, presser foot requires a trench, which is marked with P at the end of parts code. e.g. P463P.

Available Model:
747DFT-514H4, 757DFT-516H4
 

Self-installation : Y
   
KB61-A
FLAT BED CLOTH PLATE

To convert Cylinder bed machine into flat bed machine. For normal overlock sewing operation.

Available Model:
737FS, 747FS

Self-installation : Y
   
LFA
ELECTRIC TYPE UPPER TAPE FEEDING DEVICE

To keep the constant tension for sewing. Elastic tape is fed by motor for zero tension  and required length.

Available Model:
MODEL w/LFC-3,
MODEL w/TG,
MODEL w/TR
 

Self-installation : Y
   
LFC-2S
MECHANICAL TYPE ELASTIC FEEDING

To Control the elastic tape tension by adjusting the gear.
Presser Foot: as:

 Presser Foot

P101

P102

P103

WP103

Elastic Size

2-13mm

2-20mm

2-30mm

2-35mm

EX:
      P101-3 for 3 thread
      P101-4 for 4 thread
      Standard is P101. Special demand by request.

Available Model:
737FS-504M2,   747FS-514M2
 

Self-installation : Y
   
LFC-3
MECHANICAL TYPE ELASTIC FEEDING

To Control elastic tape tension by adjusting the gear.
Presser Foot :
P218-3 for 3 thread
P218-4 for 4 thread

Available Model:
737K-504M2,   737KD-504M2
747K-514M2,   747KD-514M2

Self-installation : Y
   
LS
UPPER TAPE HOLDER

For top feeding tape or elastic.

Available Model:
MODEL w/LFC-3
MODEL w/TG
MODEL w/TR
 

Self-installation : Y
   
P(KV57)
PIPING BINDER FOR GATHERING

Tape width 25 mm / Finish width 6 mm

Available Model:
MODEL w/GA

 

Self-installation : Y
   
PS
POCKET SEWING

Overlock sewing with tape binding for strengthening the pocket edge.
PS201: Folder, for tape size 3/8" (9.5mm)

Available Model:
757K-516M2,757KD-516M2
 

Self-installation : Y
   
PZ
ZIP SEAMING

Overlock sewing for joint between zipper and cloth.

Available Model:
737K-504M3,737KD-504M3

 

Self-installation : Y
   
TA
TWO CHAINSTITICH POCKET SEWING

Tape binding by two chainstitch sewing for strengthening the pocket edge.
Folder: for 25.4mm width tape.

Available Model:
757K-401M2-50,757KD-401M2-50

 

Self-installation : Y
   
TB
MACHINE BODY SUPPORTER FOR FULL SUBMERGER TABLE

700K series Machine base for Full submerger table

 

Available model:
Table 747-T1

Self-installation : Y
   
TBK
MACHINE BODY SUPPORTER FOR FULL SUBMERGER TABLE

700K series Machine base for Full submerger table

Available Model:
Table 700K-T1,Table 700KD-T1

Self-installation : Y
   
TG
TAPE GUIDE

To prevent knit wear shoulder stretching, insert woven tape for strengthening.
P254J-4A: Presser foot for maximun tape width is 13 mm.

Available Model:
747K-514M2,747K-514M7, 747KD-514M2,747KD-514M7

Self-installation : Y
   
TR
ELASTIC CONTROLLER

Applicable for non-woven/ plastic shower cap sewing. Control the tension of elastic by the spring.

Available Model:
737K-504M2, 737KD-504M2
 

Self-installation : Y
   
TU
VENTURI

When stepped on the pedal for sewing, air from compressor vacuums the thread into the trimmer tube, and then the trimmer cuts the thread.  The thread waste is collected by the tube.

Available Model:
Model w/CT, Model w/VT, Model w/DT
Model w/FV, Model w/FR
Please Refer Motor Page

Self-installation : Y
   
TUB-1
THREAD WASTE VACCUMING

Simplified accessories, easy assembly, quiet.
The set includes:
. Single-way air switch set.
. Silencer (patented design, reduces sound level effectively)

Available Model:
MODEL w/CT, MODEL w/DT,MODEL w/VT

Self-installation : Y
   
TUB-2
THREAD WASTE VACCUMING WITH PRESSER FOOT LIFTER

Simplified accessories, easy assembly, quiet. Including:
. Single-way air switch set.
. Silencer (patented design, lower the sound level effectively)
. Auto presser foot lifter.

Available Model:
Model w/CT, Model w/VT, Model w/DT
Model w/FV, Model w/FR
 

Self-installation : Y
   
TUB-3
FABRIC / THREAD WASTE VACCUMING

Simplified accessories, easy assembly, quiet. Including:
. Double-way air switch set.
. Silencer (patented design, lower the sound level effectively)
. Fabric waste vacuuming set (Y-shape vacuum gate is 360° rotative for the flexibility of operation space.
. The hight of vacuum gate silencer is adjustable. Also available is a tube to connect to as a vacuum cleaner   for table top.)

Available Model:
Model w/CT, Model w/VT, Model w/DT
Model w/FV, Model w/FR
 

Self-installation : Y
   
TUB-xxx
THREAD WASTER VACCUMING DEVICE
TUB - 1 F S  
   

1:  Rear pneumatic type for clutch motor
2:  Rear pneumatic type with presser foot ifer
     for clutch motor
3:  Front & Rear Pneumatic type for server motor
4:  Front & Rear pneumatic type with presser foot lifter
     for servo motor
5:  Rear pneumatic type with presser foot lifter
     (FLP-1A opeion) only for 700KD.
6.  Front & rear pneumatic type with preser foot lifter
     (FLP-1A option)only for 700KD

D: For 700KD model
F: For 700F model
K: For 700K model

 

S:    For server motor
NO: For clutch motor
 

 

Self-installation : Y
   
TW
TOWEL EDGING

Applicable for towel edge sewing.

Available Model:
757K-401,757KD-401
 

Self-installation : Y
   
VT
VERTICAL PNEUMATIC TYPE CHAIN CUTTER (SIDE SUCTION)

Take thread into trimmer tube by suction motor or air compressor. (Applicable for 3~4 thread machine)

Available Model:
737K, 737KD
747K, 747KD
737FS, 747FS


 

Self-installation : Y
   
WR/LFC-3
SPAGHETTI SEWING

Overlock sewing at knit tape edge and then turn it into tube. For swimwear, night gown etc.
Folder size: tape width is 22.2mm, finish tube size is 5mm in diameter.

Available Model:
737K, 737KD
 

Self-installation : Y